IBM Aptiva 2162 Series, Hardware Maintenance Service

Page: 67 / 222

Table 2-1 (Page 4 of 27). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Communication problem.
Modem function does not work
properly. Modem Wake Up on Ring
Modem connection/cable
Modem card
Riser Card
System Board
Controller Diagnostic Test Failed.
An error was detected while
testing the Hard Disk Controller
(Adapter). Hard Disk Drive
System Board
Cylinder 0 errors.
Test detected an error reading
the first cylinder of the hard disk
drive. Hard Disk Drive
System Board
Device is Not Ready
Ready the Device...
or
Press Any Key
Ensure the device is powered on.
Replace failing device
Device Adapter
(if installed)
System Board
Diskette drive indicator LED
remains on or does not light
when drive is active. Diskette drive connection/cable
Diskette drive
Media Console
Media Console host card
Media Console client card
Media Console cable
System board
3.5-in. diskette drive and
CD-ROM do not work. Media Console
Media Console host card
Media Console client card
Media Console cable
3.5-in. diskette drive does not
work. “Factory-Installed Drive Devices” on
page 2-49.
Diskette drive
Diskette drive connection/cable
Media Console
Media Console host card
Media Console client card
Media Console cable
System board
Check Procedures
2-13