IBM Aptiva 2162 Series, Hardware Maintenance Service, Page: 72 / 222

Table 2-1 (Page 9 of 27). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Machine works but fails to go
into Rapid Resume mode when
configuration is set with Standby
mode enabled or Rapid Resume
mode enabled. Software application was fully activated
before on/off switch was pushed. Try
operating Rapid Resume from Microsoft
Windows 95 Program Manager panel.
Main Components Failed.
System board error. System Board
Processor
Memory test cannot run at this
location in memory.
Not enough free memory
available to start the memory
test. Memory DIMM
System Board
Missing QAPlus/PRO Files(s).
One or more diagnostic support
files are missing. Diagnostic CD
Monitor problem:
Ÿ
Incorrect colors
Ÿ
No high intensity
Ÿ
Missing, broken, or incorrect
characters
Ÿ
Blank monitor (dark)
Ÿ
Blank monitor (bright)
Ÿ
Distorted image
Ÿ
Unreadable monitor
Ÿ
Other monitor problems
“Monitor” on page 2-65.
I/O monitor signal connection/cable
Monitor
System board
Monitor changing colors. “Monitor” on page 2-65
Monitor problem not listed above
(including blank or illegible
monitor). “Monitor” on page 2-65
System board
No beep during POST but
computer works correctly.
(System board speaker/beeper
bad.) System board
2-18