IBM Aptiva 2161, Manual

Page: 73 / 222

Table 2-1 (Page 10 of 22). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Printer Failed.
Printer powered-on and ready? Printer
Printer Cable
System Board
Printer Fault.
Printer powered on and ready? Printer
Printer Cable
System Board
Printer Not Selected.
Ensure the printer is powered on
and ready. Printer
Printer Cable
System Board
Printer problems. Refer to the service manual for the printer.
Processor fan does not run when
the power supply fan runs. With power-on, check the processor fan
connector J1 on system board for +12 V
dc.
Processor fan
System board
Processor speed seems slower. “Memory” on page 2-35.
Cache memory
System board
Program loads from the hard
disk with a known-good CD in
the CD-ROM drive or diagnostics
diskette in the first 3.5-inch
diskette drive (and CD-ROM
drive or diskette drive is enabled
in the Setup Utility). “Factory-Installed Drive Devices” on
page 2-43.
CD-ROM Drive
Diskette Drive
System Board
Power Supply
Program or File
Not Found
Press Any Key
Diagnostics cannot find the
USER(N).COM file.
Diagnostic CD or diskette
CD-ROM Drive or Diskette Drive
System Board
Program Too Big To Fit In
Memory.
Too many Terminate and Stay
Resident programs in memory. Reboot the system from the Diagnostic CD.
Check Procedures
2-19