IBM Aptiva 2161, Manual, Page: 76 / 222

Table 2-1 (Page 13 of 22). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
System fails to load the
Diagnostics and Utilities software
System preloaded software
works correctly. Make sure the CD-ROM drive or diskette
drive is included in the Setup Utility startup
sequence.
“Factory-Installed Drive Devices” on
page 2-43
CD-ROM drive connection/cable
CD-ROM drive
Diskette drive connection/cable
Diskette drive
System Board
System Hangs.
Go to “Undetermined Problem”
on page 2-63. Any device
Any adapter
System Board
System unit does not turn off
with power switch. (System unit
must be unplugged from
electrical outlet to completely
turn off.) “Power Supply” on page 2-32
Power switch assembly
System Board
The Address Exceeds The Size
Of Your Memory.
An invalid memory address was
entered. The Diagnostics Tests
display this message during the
Locate Bad Chips option under
the interact menu if an invalid
memory address was entered at
the "Enter Memory Address Of
Bad Chip" prompt. Enter correct address
Memory DIMM
System Board
That Number is Out Of Range.
An invalid bit number was
entered. Diagnostics Tests
display this message during the
Locate Bad Chips option. Enter the correct number.
Memory DIMM
System Board
Too Many Errors - Test Aborted.
Too many errors, the Diagnostics
Test cannot continue. Processor
System Board
Transmit Error.
Internal or external serial port
loopback test failure. Serial Port Cable
System Board
2-22
Machine Type 2161 - Service Level A Aptiva HMS