IBM Aptiva 2161, Manual, Page: 136 / 222

Diagnostics Control Keys
The following is a list of the Diagnostics Control Keys, when used and a
description of the Diagnostics response.
Control Keys When Used Diagnostics Response
Ctrl+A Main Menu Allows you to select test from the sub
menus that are highlighted with red
letters.
Attention: If selected, these test will
erase the information stored on the
diskette or hard disk drive.
Up and Down
Arrow Keys Main Menu
Module Test
Menu
Test Group
Menu Highlights an item you want to select.
Space Bar Module Test
Menu
Test Group
Menu Adds a diamond to the left of the
highlighted test. The test will run
when Run All Selected is highlighted
and the Enter key is pressed.
Also removes the diamond to the left
of the item. The test will not run when
Run All Selected is highlighted and
the Enter key is pressed.
Tab Key Main Menu
Module Test
Menu Selects the additional test for the
menu you are in.
+/
−
Keys Test Group
Menu Selects additional test. The LUN
displayed on the top right Test Group
Menu shows which test is selected
and how and remain (example LUN 1
of 2).
3-16
Machine Type 2161 - Service Level A Aptiva HMS