IBM Aptiva 2161, Manual

Page: 74 / 222

Table 2-1 (Page 11 of 22). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
QAPlus/PRO Cannot Be Re-run
Because Of Error In Relocating
Program.
Diagnostics failed to relocate the
Diagnostics Test programs so
the memory space it resides in
was not tested. Diagnostic CD
Memory DIMM
System Board
RAM Memory Error in Block n.
Bad bits n.
Memory error. Memory DIMM
System Board
RAM Test Failed.
Memory error. Memory DIMM
System Board
Read error on cylinder n.
Hard disk drive format error. Hard Disk Drive
System Board
Read Errors
Diskette drive read error. Diskette
Diskette Drive
System Board
Diskette Drive Cable
Real-time clock is inaccurate. Time set incorrectly by user.
RTC battery (if less than 2.8 V dc)
System Board
Receive Error.
Serial Port loopback test error. Serial Port Cable
System Board
Refresh Failure.
Diagnostics Test detected an
error while testing the DMA
controller's RAM refresh cycle. Memory DIMM
System Board
RTC Interrupt Failure.
Diagnostics Test cannot detect
the Real-Time clock interrupt. System Board
Serial Chip Error.
COM Port error, general. Serial Port Cable
System Board
Serial Compare Error.
COM Port error, information
transmitted is not the same as
information received. Serial Port Cable
System Board
2-20
Machine Type 2161 - Service Level A Aptiva HMS