IBM 88861TU, Planning Manual

Page: 95 / 130

Cabling worksheet
Use this worksheet to plan for the external network cables to attach the advanced
management module and Ethernet switch modules to external networks.
Fill out one worksheet for each BladeCenter S system.
On this worksheet, record:
1. The BladeCenter S chassis number (1 through 6)
2. The BladeCenter S chassis location in the rack (starting U through ending U)
3. The rack number and location
4. The From port: and To: connections.
Table 22. Cabling worksheet
BladeCenter S chassis number: ___
Location in rack (1 through 5): starts at U ___ and ends at U ___
Rack number and location: ______________________________
Component From port: To:
Advanced management
module (10/100 Mbps) 1
Ethernet switch module -
I/O module bay 1.
Fill in the appropriate
number of ports based on
whether you are using an
Ethernet switch module or
a copper pass-thru module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Appendix A. Installation planning worksheets
89