IBM 88861TU, Planning Manual

Page: 103 / 130

Serial port
Baud rate
Parity
Stop bits
Port assignments
Table 25. User-configurable advanced management module ports
Port name
Default
port
number
Port
number Description
HTTP 80 Port used for Web server HTTP connection using UDP
HTTPS 443 Port used for SSL connection using TCP
Telnet 23 Port used for the Telnet command-line interface
connection
SSH 22 Port used for the Secure Shell (SSH) command-line
interface connection
SNMP Agent 161 Port used for SNMP get/set commands using UDP
SNMP Traps 162 Port used for SNMP traps using UDP
FTP 21 Port used for the listen port of the
management-module FTP server.
FTP Data 20 Port used for the data port of the management-module
FTP server.
TFTP 69 Port used for the management-module TFTP server.
SLP 427 Port used for the UDP Service Location Protocol (SLP)
connection
Remote Disk 1044 Port used for the advanced management module
remote disk server.
Remote
Disk-On-Card 1045 Port used for the management-module remote
disk-on-card server.
Storage
Description
Server 1046 Port number for the management-module storage
description server.
Remote KVM 3900 Port used for the management-module remote KVM
server.
TCP
command
mode 6090 Port used for IBM Director commands using TCP/IP.
Note: IBM Director might not be able to locate the
advanced management module if this port number is
changed.
SMASH
command-line
processor 50023 Port used for the management-module SMASH
command-line protocol over Telnet.
Secure
SMASH
command-line
processor 50022 Port used for the management-module secure SMASH
command-line protocol over SSH.
Appendix B. Configuration planning worksheets
97