IBM 8865, Installation Manual

Page: 41 / 84

Rear view
The following illustration shows the connectors and LEDs on the rear of the server.
SP serial
System serial
Keyboard
Mouse
SP Ethernet 10/100
Gigabit Ethernet 2
Gigabit Ethernet 1
USB 1
USB 2
IXA RS485
Power-supply
Video
SP Ethernet
10/100 activity LED
Gigabit Ethernet 2
activity LED
Gigabit Ethernet 1
activity LED
Gigabit Ethernet 2
link LED
Gigabit Ethernet 1
link LED
SP Ethernet
10/100 link LED
I/O board error LED
Remote Supervisor Adapter II
SlimLine error LED
AC power
LED
DC power
LED
Fan error
LED
Power-supply connector: Connect the power cord to this connector.
Video connector: Connect a monitor to this connector.
USB 1 connector: Connect a USB device to this connector.
SP Ethernet 10/100 connector: Use this connector to connect the service
processor to a network.
SP Ethernet 10/100 activity LED: This LED is on the SP Ethernet 10/100
connector. When this LED is lit, it indicates that there is activity between the server
and the network.
SP Ethernet 10/100 link LED: This LED is on the SP Ethernet 10/100 connector.
When this LED is lit, it indicates that there is an active connection on the Ethernet
port.
USB 2 connector: Connect a USB device to this connector.
Chapter 3. Server controls, connectors, LEDs, and power
29