IBM 8668 - Eserver xSeries 232, Hardware Maintenance Manual

Page: 125 / 182

Error Code/Symptom FRU/Action
5962 (IDE CD-ROM configuration error)
1. Run Configuration/Setup
2. CD-ROM Drive
3.
CD-ROM Power Cable
4.
IDE Cable
5.
System Board
6.
Battery
8603 (Pointing Device Error)
1. Pointing Device
2. System Board
00019501 (Processor 1 is not functioning -
check VRM and processor LEDs)
1. VRM 1
2. Processor 1
3. System Board
00019502 (Processor 2 is not functioning -
check VRM and processor LEDs)
1. VRM 2
2.
Processor 2
3.
System Board
00019701 (Processor 1 failed BIST)
1. Processor 1
2. System Board
00019702 (Processor 2 failed BIST)
1. Processor 2
2. System Board
00180100 (A PCI adapter has requested
memory resources that are not available)
1. Reorder the adapters in the PCI slots. It is important that your
boot device is positioned early in the scan order so that it is
executed by POST.
2. Ensure that the PCI adapter and all other adapters are set
correctly in the Configuration/Setup Utility program. If the
memory resource settings are not correct, change the settings.
3.
If all memory resources are being used, you might need to
remove an adapter to make memory available to the PCI adapter.
Disabling the adapter BIOS on the adapter should correct the
error. Refer to documentation provided with the adapter.
00180200 (No more I/O space available for
PCI adapter)
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
00180300 (No more memory (above 1MB for
PCI adapter)
1. Run Configuration/Setup
2. Failing Adapter
3.
System Board
00180400
(No more memory (below 1MB for
PCI adapter)
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board
00180500 (PCI option ROM checksum error)
1. Remove Failing PCI Card
2. System Board
00180600 (PCI built-in self test failure) PCI to
PCI Bridge error
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4.
System Board
Symptom-to-FRU index
117