IBM 8668 - Eserver xSeries 232, Hardware Maintenance Manual

Page: 25 / 182

Viewing the test log
The test log will not contain any information until after the diagnostic program has
run.
Note: If you already are running the diagnostic programs, begin with step 3
To view the test log:
1. Turn on the server and watch the screen.
If the server is on, shut down your operating system and restart the server.
2. When the message
F2for Diagnostics
appears, press F2.
If a power-on password or administrator password is set, the server prompts
you for it. Type the appropriate password; then, press Enter.
3. When the Diagnostic Programs screen appears, select Utility from the top of
the screen.
4.
Select View Test Log from the list that appears; then, follow the instructions on
the screen.
The system maintains the test-log data while the server is powered on. When
you turn off the power to the server, the test log is cleared.
Diagnostic programs and error messages
Diagnostics
17