IBM 8647 - Eserver xSeries 225, Installation Manual

Page: 40 / 112

Server with non-hot-swap hard disk drives
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7
Notes:
1. Diskette drives, tape drives, CD-ROM, CD-RW, and DVD drives are examples
of removable-media drives. You can install removable-media drives in bays 1, 2,
and 3 only.
2. The integrated IDE controller in your server supports the connection of up to
four IDE devices.
3. You can install a 3.5-in. slim-high or 5.25-in. half-high removable-media drive,
such as a tape backup drive, CD-RW, or DVD drive, in bay 2.
4. The server supports only one diskette drive.
5. To install a 3.5-in. drive in a 5.25-in. bay, you must use the 5.25-in. conversion
kit, supplied with the option.
6. The electromagnetic interference (EMI) integrity and cooling of the server are
protected by having all bays and PCI slots covered or occupied. When you
install a drive or PCI adapter, save the EMC shield and filler panel from the bay
or the PCI adapter slot cover in the event you later remove the option.
7. For a complete list of supported options for your server, go to
http://www.ibm.com/pc/support/ on the World Wide Web.
20
IBM xSeries 225 Type 8647: Installation Guide