IBM 8647 - Eserver xSeries 225, Installation Manual

Page: 65 / 112

Note: If the integrated RAID controller has two channels, it will appear in the
ServeRAID Manager tree as two controller objects. However, you can
configure only one array and one RAID level-1 logical drive.
Using Express configuration: Express configuration automatically configures your
controller. It creates an array by grouping together the first two physical drives that
appear in the ServeRAID Manager tree, and it creates a RAID level-1 logical drive.
Complete the following steps to use Express configuration:
1. In the ServeRAID Manager tree, click the controller.
2. Click Express configuration .
3. Click Next . The “Configuration summary” window opens.
4. Review the information that is displayed in the “Configuration summary” window.
To change the configuration, click Modify arrays .
5. Click Apply ; then, click Yes when asked if you want to apply the new
configuration. The configuration is saved in the controller and in the physical
drives.
6. Exit from the ServeRAID Manager program and remove the CD from the
CD-ROM drive.
7. Restart the server.
Figure 2. “Configuration summary” window
Chapter 4. Configuring the server
45