IBM 847620U - Netfinity 3000 - 20U, Hardware Maintenance Manual, Page: 83 / 270

The following illustration shows the front of the CD-ROM
drive.
CD-ROM Drive
In-Use Light Emergency-Eject
Hole Eject/Load
Button
Handling a CD:
When handling a CD, follow these
guidelines:
Ÿ
Hold the CD by its edges. Do not touch the surface.
Ÿ
To remove dust or fingerprints, wipe the CD from the
center to the outside. Wiping the CD in a circular
direction might cause loss of data.
Ÿ
Do not write or stick paper on the CD.
Ÿ
Do not scratch or mark the CD.
Ÿ
Do not place or store the CD in direct sunlight.
Ÿ
Do not use benzene, thinners, or other cleaners to
clean the CD.
Ÿ
Do not drop or bend the CD.
Loading and unloading a CD
Note
Before you load or unload a CD, be sure that you
have turned on the server.
To load and unload a CD in a CD-ROM drive:
1. Press the Eject/Load button. The tray slides out of
the drive. (Do not manually force the tray open.)
2. Place the CD in the tray with the label facing up.
3. Close the tray by pressing the Eject/Load button, or
by gently pushing the tray forward. When the tray is
closed, the CD-ROM drive in-use light on the front of
the drive will activate to indicate that the drive is in
use.
4. To eject the CD, press the Eject/Load button. When
the tray slides out, carefully remove the CD.
5. Close the tray by pressing the Eject/Load button, or
by gently pushing the tray forward.
IBM Netfinity 3000 - Type 8476
75