IBM 847620U - Netfinity 3000 - 20U, Hardware Maintenance Manual, Page: 76 / 270

1. Remove the server side cover (see “Disconnecting
cables and removing the side cover” on page 84).
2. Locate the two holes on the lower right edge of the
rear of the server.
3. Insert the U-bolt through the rear panel; then, attach
and tighten the nuts with an appropriately sized or
adjustable wrench.
4. If you have completed installing the U-bolt and do not
want to install any other internal options, replace the
server side cover and reconnect all external cables
and power cords. (See “Completing the installation”
on page 77 if you need additional information.)
5. Thread the cable through the U-bolt and around an
object that is not a part of or permanently secured to
the building structure or foundation, and from which it
cannot be removed; then, fasten the cable ends
together with a lock.
The following illustration shows an example of how
this might work.
Cable
Padlock
68
Netfinity Server HMM