IBM 847620U - Netfinity 3000 - 20U, Hardware Maintenance Manual, Page: 77 / 270

Battery
If the server battery malfunctions, you must replace it as
described in this section.
IBM has designed this product with your safety in mind.
The lithium battery must be handled correctly to avoid
possible danger. If you replace the battery, you must
adhere to the following instructions.
Caution
When replacing the battery, use only IBM Part
Number 33F8354 or an equivalent type battery
recommended by the manufacturer. If the system has
a module containing a lithium battery, replace it only
with the same module type made by the same
manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
Ÿ
Throw or immerse into water
Ÿ
Heat to more than 100°C (212°F)
Ÿ
Repair or disassemble
Dispose of the battery as required by local ordinances
or regulations.
Note
In the U.S., please call 1-800-IBM-4333 for information
about battery disposal.
To order replacement batteries, call 1-800-772-2227 within
the United States, and 1-800-465-7999 or 1-800-465-6666
within Canada. Outside the U.S. and Canada, call your
IBM reseller or IBM marketing representative.
Notes
Ÿ
Read “Safety information” on page 212.
Ÿ
Followed any special handling and installation
instructions supplied with the replacement
battery.
Ÿ
Removed the server side cover.
Note
After you replace the battery, you must reconfigure the
system and reset the system date and time.
To replace the battery:
1. Locate the battery on the system board (see “System
board illustration” on page 142).
IBM Netfinity 3000 - Type 8476
69