IBM 847620U - Netfinity 3000 - 20U, Hardware Maintenance Manual, Page: 45 / 270

1. Select ISA Legacy Resources; then, use the Up
Arrow (
↑
) or Down Arrow (
↓
) key to highlight the
system resource that you want to change.
2. Select a resource; then, use the Left Arrow (
←
) or
Right Arrow (
→
) key to select a configuration choice.
If you remove an ISA legacy adapter, you must redefine
the system resource as [Available].
Power management
:
With Power Management, the server and monitor can
be set to use a reduced-power state if they are inactive for
a specified length of time. You can also specify options to
automatically start the server.
Attention
The ACPI BIOS Mode feature is the only available
Power Management feature.
The APM BIOS Mode feature is set to Disabled. Do not
change this default value.
Using the Automatic configuration and power
interface BIOS mode
:
When the automatic configuration and power interface
(ACPI) BIOS mode is enabled, the operating system
controls the power management features of the server and
the settings for APM BIOS mode are ignored. Refer to the
operating-system documentation to determine if the
operating system supports ACPI. If the operating system
does not support ACPI, you cannot use the ACPI BIOS
Mode Power Management feature.
To set ACPI BIOS mode:
1. Select Power Management from the
Configuration/Setup Utility program menu.
2. Set ACPI BIOS Mode to Enabled or Disabled as
desired using the Left Arrow (
←
) or Right Arrow (
→
)
key.
IBM Netfinity 3000 - Type 8476
37