IBM 8364 E series, User Manual, Page: 97 / 150

Error code Error message What you should do
NSB71605 DHCP offer from server
%s not valid. Verify that the DHCP server settings are
correct.
BOOTP messages (NSB72xxx)
NSB72505 BOOTP options exceed
the maximum allowable
BOOTP option length. Verify that the BOOTP server settings
are correct.
Network communication messages (NSB8xxxx)
NSB80509 Destination
unreachable, return
code
x
%d.
Verify that there are no problems with
the network, and restart the Network
Station.
NSB80519 Failed ICMP mask
request. Verify that there are no problems with
the network, and restart the Network
Station.
NSB80529 Failed ICMP router
solicitation. Verify that there are no problems with
the network, and restart the Network
Station.
NSB80539 Domain Name Server
(DNS) error, return code
%d. Verify that there are no problems with
the network, and restart the Network
Station.
NSB80549 Cannot fragment data
packet, data not sent. Verify that there are no problems with
the network, and restart the Network
Station.
NSB80550 Transfer terminated by
user. Restart the Network Station.
TFTP messages (NSB81xxx)
NSB81509 Time-out waiting for
TFTP reply. Restart the Network Station. If this does
not solve the problem, verify that you
connected the network cable to the
Network Station.
NSB81519 TFTP error - %d %s.
Boot file server messages (NSB83xxx)
NSB83509 Unable to load file via
boot file server protocol. Ensure that the boot protocol agrees
with your server settings in the NS Boot
utility.
NSB83519 Cannot access boot file
from any server. Verify your configuration settings in the
NS Boot utility, and confirm the server
configuration.
NSB83529 Cannot contact boot file
server
x
%s.
Verify that the boot server settings are
configured correctly.
Chapter 11. Identifying problems with hardware that is configured for NS Boot
85