IBM 8364 E series, User Manual, Page: 91 / 150

Error code Error message What you should do
NSB12510 Not able to access
nonvolatile memory. Replace the Network Station logic unit
(see “Chapter 2. Replacing Network
Station parts” on page 9).
NSB12520 Setting nonvolatile
memory to
manufacturing defaults. Re-enter NS Boot configuration data, if
different from the default values.
NSB12530 Detected reset jumper. The password has been cleared,.
NSB12540 New nonvolatile
memory structure
detected. Re-enter NS Boot configuration data, if
different from the default values.
Audio messages (NSB21xxx)
NSB21500 Audio failure. Replace the Network Station logic unit
(see “Chapter 2. Replacing Network
Station parts” on page 9).
Input, keyboard and mouse messages (NSB3xxxx, NSB31xxx, and NSB32xxx)
NSB30500 No input device
detected. NS Boot will
continue in 10 seconds. Check the keyboard and mouse cable
connections.
NSB31500 Keyboard did not
respond. Check the keyboard cable connection.
NSB31510 Keyboard controller did
not respond. Check the keyboard and mouse cable
connections. If the symptom remains,
replace the Network Station logic unit
(see “Chapter 2. Replacing Network
Station parts” on page 9).
NSB31520 Keyboard was not
recognized. Check the keyboard cable connection.
NSB32500 Mouse did not respond. Check the mouse cable connection.
USB messages (NSB4xxxx)
NSB40500 USB failure. Disconnect any USB devices from the
Network Station and restart the system.
If the symptom remains, replace the
Network Station logic unit (see
“Chapter 2. Replacing Network Station
parts” on page 9).
NSB40510 USB initialization
failure. Disconnect any USB devices from the
Network Station and restart the system.
If the symptom remains, replace the
Network Station logic unit (see
“Chapter 2. Replacing Network Station
parts” on page 9).
Chapter 11. Identifying problems with hardware that is configured for NS Boot
79