IBM 8364 E series, User Manual, Page: 116 / 150

Table 9. BIOS error messages table (continued)
1-3-1 Flashing
amber Not applicable Memory test: Check or replace
memory DIMMs
1-3-2 Flashing
amber Not applicable Memory test: Replace memory
DIMMs
1-4-3 Flashing
amber Not applicable Timer failure: Replace logic unit
1-4-4 Flashing
amber Not applicable NMI port test failure: Replace logic
unit
2-0-0 Steady green Not Applicable Configuration Error: See
“Configuration errors” on page 105.
2-1-1 Flashing
amber Not applicable DMA test failure: Replace logic unit
2-1-2 Flashing
amber Not applicable DMA test failure: Replace logic unit
2-1-3 Flashing
amber Not applicable Interrupt mask register failure:
Replace logic unit
2-1-4 Flashing
amber Not applicable Interrupt mask register failure:
Replace logic unit
2-2-2 Flashing
amber Not applicable Keyboard controller: Replace logic
unit
2-3-2 Flashing
amber Not applicable Video memory: Replace logic unit
2-3-3 Flashing
amber Not applicable Screen retrace test failure: Replace
logic unit
3-1-1 Flashing
amber Not applicable Interrupt failure: Replace logic unit
3-1-2 Flashing
amber Not applicable Timer 2 failure: Replace logic unit
3-1-4 Flashing
amber Not applicable TOD failure: Replace logic unit
3-2-4 Flashing
amber Not applicable CMOS memory miscompare: Clear
CMOS.
3-3-1 Flashing
amber Not applicable Memory size mismatch: Replace
memory DIMMs
**There are no beep sequences after this point: Video output is active**
All BIOS errors will appear in the upper right corner of the screen.
LED status BIOS error
checkpoint Problem location: Problem
Resolution
Not applicable D0 Record cache state: Replace logic unit
104
IBM Network Station