IBM 6889 - IntelliStation M - Pro, User Manual

Page: 45 / 182

Viewing and Changing Settings
The Configuration/Setup Utility program menu lists items that identify system
configuration topics. If a bullet (
Ÿ ) appears beside a menu item, then an additional
menu is available. If a right arrowhead (
5
) appears beside a menu item, then a
change to that item has been made or the Configuration/Setup Utility program
detected an error and attempted to correct it. Also, an additional menu might
follow a menu item with a
5
beside it. If an asterisk (*) appears next to a menu
item, it indicates a system resource conflict. Resolve this conflict before exiting from
the Configuration/Setup Utility program so that your computer will function
properly. For information and instructions on resolving system resource conflicts,
refer to Installing Options in Your IntelliStation M Pro and the documentation that
comes with the hardware you want to install.
When working with the Configuration/Setup Utility program menu, you must use
the keyboard. Refer to the following table for the keys used to accomplish various
tasks.
Note: Active keys are displayed at the bottom of each screen; not all of the above
keys are active with every menu.
Keys Function
↑ ↓
Use these arrow keys to move between menu items until the item you
want is highlighted.
← →
Use these arrow keys to display and toggle between choices for a menu
item.
Enter Press this key to select a highlighted menu item.
Esc Press this key to exit from a menu after viewing or making changes to
the settings in the menu.
+
Use this key in some menus to increase the numerical value of a setting.
−
Use this key (the minus or hyphen key) in some menus to decrease the
numerical value of a setting.
0–9 Use these number keys in some menus to change the numerical value of
a setting.
F1 Press this key for help on a selected menu item.
F9 Press this key if you changed and saved the setting of a selected menu
item and you want to restore the setting that was active before you
made the change.
F10 Press this key to return the setting of a selected menu item to a default
value.
Chapter 5. Configuration/Setup Utility Program
31