IBM 6889 - IntelliStation M - Pro, User Manual

Page: 113 / 182

POST Message Description
1762 A hard disk configuration error occurred.
Action:
1. Verify that the Configuration/Setup Utility program correctly
reflects the number of hard disk drives you have installed.
(For instructions on using the Configuration/Setup Utility
program, refer to Chapter 5, “Using the Configuration/Setup
Utility Program” on page 29.)
2. If you added or removed a hard disk drive, you must save the
new configuration in the Configuration/Setup Utility program.
Refer to the Important text box on page 32 for further
information and instructions on saving the configuration.
If the problem cannot be isolated and corrected, have the computer
serviced.
178X A failure occurred during testing of the hard disk drive or a
primary or secondary IDE device.
Action:
1. Run the diagnostic programs. (See “IBM Enhanced
Diagnostics” on page 125 for information about diagnostic
programs provided with your computer.)
2. If the diagnostic programs detect a failure, replace the
defective hard disk drive or primary or secondary IDE or EIDE
device.
If the problem cannot be isolated and corrected, have the computer
serviced.
Chapter 8. Solving Problems
99