IBM 6889 - IntelliStation M - Pro, User Manual

Page: 109 / 182

POST Message Description
168 Alert on LAN is not working correctly.
Action: Set Alert on LAN to enabled in the Configuration/Setup
Utility program. See Chapter 5, “Using the Configuration/Setup
Utility Program” on page 29. Verify that the Ethernet cable is
attached to both client and server and that the appropriate
software is installed on both the client and the server.
If this does not correct the problem, have the computer serviced.
175 A failure occurred during testing of the system board and
microprocessor.
Action: Have the computer serviced.
176 System cover has been removed
Action: You must key in the administrator password to clear this
POST message. If the message recurs when the cover has not been
removed, have the computer serviced.
177 An inventory violation occurred, such as a hardware component
was removed. This error message is part of the AssetCare and
Asset ID features of your computer.
Action: You must enter the administrator password to clear this
POST message.
183 Password message received if administrator password is set.
Action: You must enter the administrator password to clear this
POST message. If the message recurs when the cover has not been
removed, have the computer serviced.
184 Asset control antenna not detected.
Action: You must enter the administrator password to clear this
POST message. If the message recurs when the cover has not been
removed, have the computer serviced.
186 Security hardware control logic error. The security data could
either not be read or written and the administrator password and
startup sequence are not reliable.
Action:
If your computer is in enhanced security mode, the
startup process will not continue. The system board must be
replaced.
Chapter 8. Solving Problems
95