IBM 6868 - IntelliStation M - Pro, User Manual

Page: 109 / 188

Updating the computer configuration
Important:
The configuration information in this section applies to installing
options. For more information on using the Configuration/Setup utility
program, see the Chapter 4, “Using the Configuration/Setup Utility
program” on page 43.
You might need to install device drivers after updating the configuration
settings. For more information, see the instructions that come with the
option to determine if device drivers are required and how to install them.
Some device drivers are included on the Device Driver and IBM Enhanced
Diagnostics CD that comes with your computer.
After adding options, you must update the configuration settings. In most
cases, system programs perform this configuration automatically. If the
settings are not updated automatically, you can use the
Configuration/Setup utility program to reconfigure the appropriate settings.
In either case, you must save the settings before exiting from the
Configuration/Setup utility program.
For example, when you start your computer after adding most internal hard
disk drives, the settings might be updated. If the settings are not updated,
use the Configuration/Setup utility program to make and save those
changes.
Note:
For more information on error messages from resource conflicts, see
Chapter 6, “Troubleshooting” on page 97.
Chapter 5. Installing options
95