IBM 6868 - IntelliStation M - Pro, User Manual

Page: 72 / 188

Setting automatic power-on features
You can use the automatic power-on features on the power-management
menu to enable and disable features that automatically turn on your
computer. You must also select the startup sequence you want to use for
the type of power-on event you select.
Ÿ
Wake on LAN: If you have remote network-management software you
can use the IBM-developed Wake on LAN feature. When you set
Wake on LAN to Enabled, your computer will turn on when it receives
a specific signal from another computer on your local area network
(LAN).
Ÿ
Wake Up on Alarm: With this feature, you can specify a date and time
at which the computer will be turned on automatically. This can be
either a single event, a daily event, or a weekly event.
Ÿ
PCI Wake Up: If this setting is enabled, your computer turns on in
response to wake up requests from PCI devices that support this
feature.
To set automatic power-on features, follow these steps:
1. Start the Configuration/Setup utility program (see “Starting and using
the Configuration/Setup Utility program” on page 43).
2. Select Power Management and press Enter.
3. Select Automatic Power On and press Enter.
4. Select the menu item for the feature you want to set. Use Left Arrow
(
←
) or Right Arrow (
→
) to select either Enabled or Disabled. Press
Enter.
5. Select Startup Sequence for the feature. Use Left Arrow (
←
) or Right
Arrow (
→
) to select either Primary or Automatic. If you select
Automatic , make sure Automatic Power On Startup Sequence in the
Startup Sequence menu is set to Enabled. Otherwise, the system will
use the Primary startup sequence.
6. Press Esc until you return to the Configuration/Setup utility program
menu.
7. Select Save Settings from the Configuration/Setup utility program
menu and press Enter. Then press Esc and follow the instructions on
the screen to exit from the Configuration/Setup utility program.
58
IntelliStation User Guide