![IBM 6868 - IntelliStation M - Pro User Manual Download Page 71](http://html1.mh-extra.com/html/ibm/6868-intellistation-m-pro/6868-intellistation-m-pro_user-manual_3704157071.webp)
– Standby: In this mode, the screen is blanked, but the screen image
is restored immediately when any activity is detected.
– Suspend: In this mode, the monitor uses less power than in
standby mode. The screen is blanked, but the screen image is
restored within a few seconds after any activity is detected.
– OFF: In this mode, the monitor power is turned off. To restore
power to the monitor, you must press the monitor power switch.
On some monitors, you might have to press the power switch
twice.
If OFF is selected, you must specify the Time to Display 'OFF'.
You can select 5 minutes to 1 hour.
Note:
Time to display off is the amount of time from when the
reduced-power state begins until the display turns off.
– Disable: In this mode, the monitor is unaffected by the power
management settings.
IDE Drives
: You can use this selection to specify whether the IDE
drives are enabled or disabled when power-management features are
activated.
To set power management features:
1. Start the Configuration/Setup utility program (see “Starting and using
the Configuration/Setup Utility program” on page 43).
2. Select Power Management and press Enter.
3. Select APM and press Enter.
4. Set APM BIOS Mode to Enabled or Disabled.
5. Set Automatic Hardware Power Management to Enabled.
6. Select values for power management (time to low power, system
power, processor speed, display, and time to display off), as desired.
7. Select Low Power Entry Activity Monitor and press Enter.
8. Set to Enabled or Disabled devices you want to be monitored for
power management.
Note:
If all devices are set to disabled, you must restart the computer
to wake the system.
9. Press Esc three times to return to the Configuration/Setup utility
program menu.
10. Select Save Settings from the Configuration/Setup utility program
menu; then press Esc and follow the instructions on the screen to exit
from the Configuration/Setup utility program.
Chapter 4. Using the Configuration/Setup Utility program
57
Summary of Contents for 6868 - IntelliStation M - Pro
