IBM 6868 - IntelliStation M - Pro, User Manual

Page: 31 / 188

Running the setup program
Before you start the setup procedure, you need the following:
Ÿ
The Windows manual that is provided with your computer, in case you
need more detailed information than is provided in this chapter
Ÿ
Microsoft Certificate of Authenticity (attached to the front cover of your
Windows manual) for the Product ID number
Ÿ
Network information (if applicable) from your network administrator
Ÿ
The printer model and port that is used by the printer, if a printer is
attached directly to your computer
The setup program appears when you start the computer for the first time.
The program will prompt you to make choices or type information as
required.
Notes:
1. If the setup program has already been run once, it will not appear
when you start your computer (if you need more detailed information,
see your Windows manual).
2. The setup program that appears when you start the computer is
slightly different from the one that is described in your Windows
manual. Some choices described in your Windows manual do not
appear because they are preset.
3. During the setup procedure, you must indicate that you accept the
Microsoft Windows license agreement. If your operating system is
Windows NT Workstation, type in the Product ID number from the
Certificate of Authenticity, when prompted. The Certificate of
Authenticity is attached to the front cover of your Windows manual.
For Windows NT
After the setup procedure is completed and the computer is restarted,
when prompted, press Ctrl+Alt+Delete to display the log on window.
After the log on procedure is completed, the Windows NT Workstation
desktop appears.
Chapter 2. Setting up your computer
17