IBM 686536U - IntelliStation Z - Pro 6865, User Manual

Page: 58 / 160

Ÿ
IDE Drives : This selection enables you to specify if the IDE drives should be
enabled or disabled when power management options take affect.
To set Power Management features:
1. Start the Configuration/Setup Utility Program (see “Starting and Using the
Program” on page 28).
2. Select Power Management from the Configuration/Setup Utility Program menu.
3. Select APM.
4. Set APM BIOS Mode to Enabled.
5. Select values for power management (time to low power, system power,,
processor speed, display, and time to display off), as desired.
6. Set IDE Drives to Enabled or Disabled.
Note:
SCSI drives are not affected by APM.
7. Press Esc twice to return to the Configuration/Setup Utility Program menu.
8. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility Program menu.
9. To exit from the Configuration/Setup Utility Program, press Esc and follow the
instructions on the screen.
Setting Automatic Power-On Features:
The Automatic Power-On features
within the Power Management menu allow you to enable and disable features that
automatically turn on your computer. You must also select the startup sequence
you want to use for the type of power-on event selected. If you select Automatic,
make sure Automatic Power On Startup Sequence in the Startup Sequence menu is
set to enabled. Otherwise, the system will use the Primary startup sequence.
Ÿ
Wake on LAN: If you have remote-network-management software, you can use
the IBM-developed Wake on LAN feature built into the integrated Ethernet
subsystem in your computer. (You can also use the Wake on LAN feature if
you have disabled the integrated Ethernet subsystem and have installed a
properly configured token-ring adapter that is enabled for Wake on LAN.)
When you set Wake on LAN to Enabled, your computer will turn on when it
receives a specific signal from another computer on your local area network
(LAN).
Ÿ
Serial Port Ring Detect: If your computer has an external modem connected to
a serial port and you want the computer to turn on automatically when a ring is
detected on the modem, set this feature to Enabled.
44
Z Pro User Guide