IBM 686536U - IntelliStation Z - Pro 6865, User Manual

Page: 42 / 160

Starting and Using the Program
To start the Configuration/Setup Utility Program:
1. Turn on your computer. If your computer is already on when you start this
procedure, you must shut down the operating system, turn off the computer,
wait a few seconds until all in-use lights go off, and restart the computer. (Do
not use Ctrl+Alt+Del to restart the computer.)
2. When the Configuration/Setup Utility Program prompt appears in the lower-left
corner of the screen during startup, press F1. (This prompt appears on the
screen for only a few seconds. You must press F1 quickly.)
3. If you have not set an administrator password, the Configuration/Setup Utility
Program menu appears on the screen. If you have set an administrator
password, the Configuration/Setup Utility Program menu will not appear until
you type your administrator password and press Enter. See “Power-On
Password” on page 30 and “Administrator Password” on page 34 for more
information.
The menu you see on your computer might look slightly different from the menu
shown here, but it will operate the same way.
Configuration/Setup Utility
Select Option:
Ÿ
System Summary
Ÿ
Product Data
Ÿ
Devices and I/O Ports
Ÿ
Start Options
Ÿ
Date and Time
Ÿ
System Security
Ÿ
Advanced Setup
Ÿ
ISA Legacy Resources
Ÿ
Power Management
Save Settings
Restore Settings
Load Default Settings
Exit Setup
28
Z Pro User Guide