IBM 6400 Series, Operation Manual

Page: 85 / 110

printer configuration
Multi–Platform Interface Feature Operation Guide 71
Custom Set 8 (partial)
PRINTER CONTROL
INTERFACE SELECTION PARALLEL
DISPLAY LANGUAGE ENGLISH
ALARM CONTROL ALARM ENABLE
PRINT DIRECTION BIDIRECTIONAL
HEX PRINT MODE DISABLE
POWER ON STATE READY
PAPER JAM DETECTION ENABLE
FORMS SPEED NORMAL SPEED
SET PLATEN AT BOTTOM OF FORM DISABLE
SHUTTLE TIMEOUT 20 SECONDS
ENERGY SAVER TIMER 15 MINUTES
OCR FONT DENSITY 120 DOTS PER INCH
EJECT/RESTORE STANDARD
CONFIGURATION MANAGEMENT
RECALL CUSTOM SET FACTORY DEFAULT
SAVE CURRENT VALUES 1
DELETE CUSTOM SET 1
CHANGE POWER ON SET FACTORY DEFAULT
PROTECT CUSTOM SETS DISABLE
PRINT CUSTOM SET VALUES CUSTOM/PRELOADED SET 8
PARALLEL INTERFACE
INTERFACE TYPE PC PARALLEL
PC PARALLEL
DATABIT 8 ENABLE
DATA POLARITY STANDARD
STROBE POLARITY STANDARD
RESPONSE POLARITY STANDARD
BUSY ON STROBE ENABLE
LATCH DATA ON TRAILING EDGE
PRIME SIGNAL DISABLE
TOF ACTION AT PRIME SIGNAL FORM FEED AT RESET
BUFFER SIZE IN KILOBYTES 1
DATAPRODUCTS
DATABIT 8 ENABLE
PI IGNORED ENABLE
DATA POLARITY STANDARD
DATA REQUEST POLARITY STANDARD
STROBE POLARITY STANDARD
SERIAL INTERFACE
INTERFACE TYPE RS 232
DATA PROTOCOL XON/XOFF
BAUD RATE 9600 BAUD
DATA BITS 8
STOP BITS 1
PARITY NONE
DATA TERMINAL READY READY AND BUFFER NOT FULL
REQUEST TO SEND READY AND BUFFER NOT FULL
BUFFER SIZE IN KILOBYTES 1
POLL CHARACTER 00 HEX
ONE CHAR ENQUIRY DISABLE
EMULATION CONFIGURATION
ASCII PRINTER EMULATION P-SERIES EMULATION
PRINTER EMULATION CONFIGURATIONS