118
EIDE Configurations
EIDE models include a standard CD-ROM drive attached to one connector of the IDE controller using a single-drop IDE cable and the standard IDE HDD is attached
to the other IDE connector using a standard two-drop IDE cable. One additional IDE HDD may be installed in the one available HDD bay, attaching to the second
drop of the standard two-drop IDE cable.
SCSI Configurations
SCSI models include a standard single-channel PCI SCSI storage controller with one internal connector installed in slot two that attaches to a standard nonhot-swap
SCSI HDD using the standard 16-bit LVD terminated two-drop SCSI cable. External SCSI devices require a supported SCSI controller. The standard CD-ROM
attaches to the IDE connector using a single-drop IDE cable. In RAID configurations using a ServeRAID-4Lx controller, the HDDs are attached to the RAID controller
using the standard cable.
For additional information regarding internal cabling, refer to Appendix F: Internal Cabling Overview.
xSeries 305 Internal SCSI Cabling
xSeries 305 Hard Disk Drive (HDD)
SCSI Models
Total
Internal
Storage
1
10,000rpm SCSI HDDs
15,000rpm SCSI HDDs
18.2GB
(06P5750)
36.4GB
(06P5751)
73.4GB
(06P5752)
18.2GB
(06P5765)
36.4GB
(06P5766)
18.2GB
Standard in SCSI models
-
-
-
-
36.4GB
1
-
-
1
-
72.8GB
2
-
2
-
-
2
73.4GB
2
-
-
1
-
-
146.8GB
2
-
-
2
-
-
This table does not represent all possible HDD configurations. Total internal storage listed is /- 0.2GB unless otherwise noted.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice.
2. Requires removing the standard HDD.
IDE Models
Total
Internal
Storage
1
7200rpm IDE HDDs
2
40GB
(P/N 22P7157)
60GB
(P/N 09N4207)
80GB
(P/N 09N4226)
120GB
(P/N 09N4231)
40GB
Std on IDE models
-
-
-
80GB
1
-
-
-
100GB
-
1
-
-
120GB
-
-
1
-
140GB
2
-
1
1
-
160GB
2
-
-
2
-
200GB
2
-
-
1
1
240GB
2
-
-
-
2
This table does not represent all possible HDD configurations. Total Internal Storage listed is /- 0.2GB unless
otherwise noted.
1. Select a total storage row then add the quantity of HDDs from all columns to the standard HDD.
2. Requires removal of the standard HDD.
