178
RXE-100 Remote Expansion Enclosure Power
Part Number
Description
Power
1
31P6108
370W Hot-Swap Redundant Power Supply
Uninterruptible Power Supply (UPS)
2
32P1020
APC 2U Smart-UPS 1400RMB
94G6676
APC Smart-UPS 3000RMB
3
37L6861
APC Smart-UPS 5000RMB
4
1. RXE-100 includes two 370W hot-swap power supplies, each with two 9ft power cords--one high voltage IEC 320-C13 to
IEC 320-C14 and one low voltage IEC 320-C13 to NEMA 5-15P. N+1 power supply redundancy is standard for full
configurations. A third power supply is not supported.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See Rack Cabinets and Options section for supported IBM racks.
4. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.
Bus 3: PCIX Slot 1, 3.3V
Bus 1: PCIX Slot 6, 3.3V
Bus 3: PCIX Slot 2, 3.3V
Bus 1: PCIX Slot 5, 3.3V
Bus 2: PCIX Slot 4, 3.3V
Bus 2: PCIX Slot 3, 3.3V
All slots are 64-bit, full-length, 133MHz Active PCI-X. Each bus supports only one 133MHz
adapter. If two 133MHz adapters are installed, both will operate at 100MHz. If a lower
frequency adapter is installed, the bus will operate at that frequency.
Scan sequence: slots 11, 12, 9, 10, 7, 8, 17, 18, 15, 16, 13, 14.
