168
1. HDD bays in the secondary server in 16-way configurations do not support boot disks.
2. Removable media bays in the secondary server in 16-way configurations are disabled.
3. Installed standard in bay 3. Not compatible with bay four.
4. Install only as an option in bay three, requiring removal of standard FDD.
5. Installed standard in bay four.
6. Install in either bay three or four, requring removal of standard devices. If only one optical drive is installed, it
must be installed in bay four. If a second optical drive is installed, use bay three configured as slave.
7. Not supported by the onboard external SCSI port, which supports external tape enclosures only. External
SCSI HDD storage requires a RAID controller. Fibre Channel HDD storage requires a Fibre Channel controller.
For HDD expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices,
refer to the Fibre Channel Solutions Overview section.
8. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
9. FAStT EXP700 Storage Expansion Unit (P/N 17401RU) includes dual hot-swap 400w power supplies, each with
its own power cord.
10. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
11. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own
power cord.
12. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
xSeries 440 I/O Options
Part
Number
Description
Adapter
Length
PCI
Support
1
Slots
Supported
1
Hot-
Plug
2
PCI Voltage
Key
MHz
Storage Controllers
3
37L6889
ServeRAID-4H Ultra160 SCSI Controller
4
Full
64-bit
1 ... 6
X
Universal
33
06P5736
ServeRAID-4Mx Ultra160 SCSI Controller
5
Full
64-bit
1 ... 6
X
Universal
66
06P5740
ServeRAID-4Lx Ultra160 SCSI Controller
6
Half
64-bit
1 ... 6
X
Universal
66
19K4646
PCI Wide Ultra160 SCSI Adapter
7
Half
32-bit
1 ... 6
-
Universal
66
Fibre Storage Controllers and Options
8
00N6881
Netfinity FAStT Host Adapter
Half
64-bit
1 ... 6
X
Universal
66
24P0960
FC2-133 Host Bus Adapter
Half
64-bit
1 ... 6
X
Universal
133
17421RU
FAStT700 Fibre Channel Storage Server
-
-
-
-
-
-
35521RU
FAStT500 Storage Server
-
-
-
-
-
-
35421RU
FAStT200 Storage Server
-
-
-
-
-
-
35422RU
FAStT200 HA Storage Server
-
-
-
-
-
-
3534F08
TotalStorage SAN Switch F08 - 8-port
-
-
-
-
-
-
2109F16
SAN Fibre Channel Switch, 16-Port (2Gb)
-
-
-
-
-
-
2108R3L
SAN Data Gateway Router Ultra SCSI LVD Port
9
-
-
-
-
-
-
Networking
10
Ethernet
11
09N9901
10/100 EtherLink Server Adapter by 3Com
12, 17
Half
32-bit
1 ... 6
X
Universal
33
06P3601
10/100 Ethernet Server Adapter
12
Half
32-bit
1 ... 6
X
Universal
33
22P4901
10/100 Dual Port Server Adapter
12
Half
64-bit
1 ... 6
X
Universal
66
22P7801
NetXtreme 1000 SX Fiber Ethernet Adapter
Half
64-bit
1 ... 6
X
Universal
133
31P6301
NetXtreme 1000 T Ethernet Adapter (copper)
12
Half
64-bit
1 ... 5
X
Universal
133
Token Ring
34L5001
16/4 Token-Ring PCI Management Adapter
12
Half
32-bit
1 ... 6
X
Universal
33
34L5201
High-Speed 100/16/4 Token-Ring PCI Management
Adapter
12
Half
32-bit
1 ... 6
X
Universal
33
System Management
13
03K9309
Advanced System Management Interconnect Cable Kit
14
-
-
-
-
-
-
Remote I/O Expansion
8684-1RX
RXE-100 Remote Expansion Enclosure
15, 16
-
-
-
-
-
-
Note: xSeries 440 supports the IXA Adapter (P/N 1519100) for connection of two-, four- and eight-way systems to iSeries models for Microsoft Windows 2000 Server and Advanced Server.
The adapter must be installed in PCI slot two only.
1. Adapters rated at a lower frequency than the slots in which they are installed will reduce the bus to the frequency of the slowest adapter. 133MHz PCI-X adapters are backward compatible
with 33/66MHz, 64-bit PCI-based servers.
2. All six slots are full-length hot-plug capable. For network operating system support, access www.pc.ibm.com/us/compat.
3. xSeries 440 includes an integrated dual channel Ultra160 SCSI controller with one external and one internal connector. See Internal SCSI Cabling or Internal Cabling Overview for cabling
alternatives. When a RAID controller is installed as a boot disk, it must be installed in a slot that is scanned before other RAID controllers in the configuration. Refer to the scan sequence
provided in this section.
4. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache. The two internal connectors are not
accessible due to a cabling interference. Four external Ultra160 0.8mm VHDCI connectors are available.
5. ServeRAID-4Mx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor that provides 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connections (only two connectors may be used). External connectors are 0.8mm VHDCI.
