IBM 4610 SureMark GR3, Programming Manual Supplement

Page: 111 / 183

5.9.3 CA - PRINT AND DOWNLOAD GRAPHICS
This command is used to download and print graphics.
5.9.3.1 Command Format
-----------------------------------------------------------------------
BYTE BIT CONTENT TYPE LENGTH
0-1 1B66 - Cmd Prefix hex 2
2 CA - Print and Download Graphics hex 1
3 Cmd. Extension hex 1
00 = First Print 100 DPI Packet (Note 1)
01 = First Print 200 DPI Packet (Note 1)
02 = First Download Packet (Note 1)
08 = Next Packet
09 = Last Packet
0A = Cancel Graphics Transmission
10 = Erase Graphics Download Area
11 = Print Downloaded 100 DPI
12 = Print Downloaded 200 DPI
If Cmd. Extension = 00 or 01 specify
4 Width hex 1 (Note 2)
5 Height hex 1 (Note 2)
6-65 First Pixels in Graphics hex 60
If Cmd. Extension = 02 specify
4 Width hex 1 (Note 2)
5 Height hex 1 (Note 2)
6 Graphic Number hex 1 (Note 3)
7-65 First Pixels in Graphics hex 59
If Cmd. Extension = 08 or 09 specify
4-65 Pixels in Graphics hex 62
If Cmd. Extension = 11 or 12 specify
4 Graphic Number hex 1 (Note 3)
-----------------------------------------------------------------------
Notes:
1. If the number of data bytes exceeds 61 or 62 (depending on the cmd. extension), the POS will
need to send a next or last packet after the first packet.
2. The number given in this field should be multiplied by 8 in order to get the number of pixels.
3. The fiscal printer can store up to 40 graphics in its internal memory so they can be printed
later. The valid range is from x01 to x28.
Command Set Reference — Page 111 of 183