IBM 4610 SureMark GR3, Programming Manual Supplement

Page: 48 / 183

5.1.2 18 - SET FISCAL MODE
This command is used to set the fiscal mode in fiscal memory.
Once this procedure has been executed the fiscal printer operates according to the configured country fiscal
law.
5.1.2.1 Command Format
-----------------------------------------------------------------------
BYTE BIT CONTENT TYPE LENGTH
0-1 1B66 - cmd prefix hex 2
2 18 - Set Fiscal Mode hex 1
3 Cmd. Extension hex 1
7-0 Reserved (always =
′0
x00
′ )
4-7 Password ASCII 4
-----------------------------------------------------------------------
5.1.2.2 Set Fiscal Mode Calculations
If the new Lira was set, the fiscal memory is updated by filling an entry in the new Lira table with the
following data:
FM_N L _Date
=
Current_Date
FM_N L _Time
=
Current_Time
FM_N L _N_Clos
=
Lif_N_Clos
+
1
5.1.2.3 Set Fiscal Mode Rules
•
This procedure can be executed only once and out of the sale period.
•
If the new Lira was set in training mode, then the new Lira table is stored in FM when the x18 cmd. is
issued.
Page 48 of 183 — IBM 4610 SureMark Fiscal Printer Turkey - Models GR3/GR5/GB3/GB5 Programmin