IBM 4610 SureMark GR3, Programming Manual Supplement

Page: 29 / 183

3.3 POS Fiscal General Information and Rules
3.3.1 Fiscal Memory Connection
Fiscal memory may not be disconnected. The microcode checks for a good connection at power up and
before execution of the following commands:
•
01 - Print Header
•
06 - End Transaction
•
15 - Fiscal Memory Report
•
13 - Close Sale Period
If the fiscal memory is not connected, an error is reported to the application when the application attempts
to execute the commands above.
Once the memory is detected as being disconnected, an error is sent to the application if any of the following
commands are sent to the printer:
•
1B - Serialize Fiscal Printer
•
18 - Set Fiscal Mode
•
19 - Set Currency Thousand Separator
•
C4 - Fiscal Parameter Configuration
•
07 - Cancel Transaction
•
D2 - Item Sale
•
D3 - Negative Item Sale
•
D4 - Subtotal/Total Transaction
•
D5 - Payment
•
D9 - Discount/Uplift on Subtotal
•
E0 - Print Fiscal, Return and Diplomatic Receipt
•
E3 - End Fiscal, Return and Diplomatic Receipt
•
E2 - Print Waybill Receipt
•
E5 - End Waybill Receipt
•
C0 - Print Credit Card Slips
•
14 - X-Report
•
DD - Start Application-Originated Report
•
DE - End Application-Originated Report
•
All Printer Commands
If Fiscal memory is not connected, an error is reported to the application. Recovery from this error requires
that the RAM is cleared using the hardware J4/CE jumper.
Fiscal Accounting Technical Description — Page 29 of 183