IBM 4610 SureMark GR3, Programming Manual Supplement

Page: 51 / 183

5.1.5 20 - LOAD TAX RATE TABLE
This command is used to load the TAX rate table into fiscal battery backed up RAM.
5.1.5.1 Command Format
-----------------------------------------------------------------------
BYTE BIT CONTENT TYPE LENGTH
0-1 1B66 - cmd prefix hex 2
2 20 - Load TAX Rate Table hex 1
3 Cmd. Extension hex 1
01 = TAX Departament 01 - 05
02 = TAX Departament 06 - 10
4-7 Password ASCII 4
8-9 Reserved ASCII 2
10-13 TAX Rate for Departament 01/06 ASCII 4
14-15 Reserved ASCII 2
16-19 TAX Rate for Departament 02/07 ASCII 4
20-21 Reserved ASCII 2
22-25 TAX Rate for Departament 03/08 ASCII 4
26-27 Reserved ASCII 2
28-31 TAX Rate for Departament 04/09 ASCII 4
32-33 Reserved ASCII 2
32-37 TAX Rate for Departament 05/10 ASCII 4
-----------------------------------------------------------------------
Notes:
1. Tax rate is a fixed point number with 2 decimal digits.
Separator characters must not be included in the TAX rate string.
For example, for TAX rate 8%, specify
′0800′.
2. TAX rate field can range from
′0000′
to
′9999′.
Values from
′0000′
to
′9998′
are used to specify the TAX rate, while value
′9999′
is used to
inhibit the corresponding category.
3. The print format for TAX rates depends on their specification:
a. If all rates are specified as
′
xx00
′
the print format is %rr
b. If at least one rate is not specified as
′
xx00
′
the print format is %rr.rr
5.1.5.2 Load TAX Rate Table Rules
•
The TAX rate table is loaded into fiscal battery backed up RAM.
•
10 categories must be loaded.
Command Set Reference — Page 51 of 183