IBM 4560SLX, User Manual

Page: 96 / 128

2. Install a terminator on the master library controller adapter connection.
3. Optional: Connect the WAN point to the host with a 10BaseT cable as shown in
Figure 64 on page 71 and Figure 85. This step is applicable to systems that
utilize a host. (For WEB TLC operations.)
4.
Using 10BaseT cable, connect a cable from router port 1 to the primary master
SDLT module. See Figure 64 on page 71 and Figure 85.
5. Connect a cable from router port 2 to the secondary master.
6.
Continue connecting cables, router port 3 to the third module, port 4 to the
fourth module and so on until all modules are connected to the router. Ensure
the power is off before proceeding with steps 7 and 8.
1 5 6 7
WAN
4 3 2
1
To host
4
Library controller card terminator connection
2
Master to cartridge elevator
5
10BaseT connections
3
Cartridge elevator to secondary master
Figure 85. Four module library cabling
86
4560SLX Tape Library: User’s Guide
Get other manuals https://www.bkmanuals.com