IBM 4560SLX, User Manual

Page: 39 / 128

To move a cartridge, complete the following procedure:
1.
Touch the Source box or Source Element Type from the Move Media screen.
The Source box will change from gray to an active state as shown in Figure 35.
2. From the Source Element Type area, select the element type you want to move.
Drive 2 is used for this example.
3. Touch the Destination box on the Move Media screen. The Destination box
will change from gray to an active state as shown in Figure 36.
4. From the Destination Element Type area, select the element type you want to
move media to. Continue selecting the destination option until the desired
Figure 34. Move Media screen
Figure 35. Move Media screen (source)
Figure 36. Move Media screen (destination)
Chapter 4. Operation
29
Get other manuals https://www.bkmanuals.com