IBM 4560SLX User Manual Download

Page: 94 / 128

Press

Master

, then press

Save

The Module Configuration Confirmation pop-up window is displayed.

Press

. The module reboots.

The touch screen will display the module as “Primary Master (Active)” when
all cabling has been performed.

Configuring slave modules

To configure the slave modules, complete the following procedure:

Press

Menu

on the touch screen of the library you want to configure as a

slave.

Under Edit Options press

Library

Press the scroll down arrow until Module Configuration is visible.

Press the button adjacent to Module Configuration.
The Module Configuration screen is displayed.

Press

Slave

Press

Save

Module Configuration Confirmation pop-up window is displayed.

Press

. The module reboots.

Several screen functions are not available to slave modules. Those functions
including Online, Magazine Access, Mail Slot Access, and Move Media are

Figure 82. Module Configuration screen

Figure 83. Module Configuration screen

4560SLX Tape Library: User’s Guide

Get other manuals https://www.bkmanuals.com

Summary of Contents for 4560SLX

































































































































Search results

Summary of Contents for 4560SLX

Reviews:

Related manuals for 4560SLX

Brands by name

Popular brands

IBM 4560SLX, User Manual

Search results

Summary of Contents for 4560SLX

Reviews:

Related manuals for 4560SLX

Brands by name

Popular brands