IBM 4560SLX, User Manual

Page: 22 / 128

Attaching the slide members to the library
To attach the slide members to the library, complete the following procedures:
1.
Remove the inner slide member (
1
) from each rack-mount slide.
2. Attach the inner slide members to the sides of the chassis using eight hex
screws (
2
).
1
Inner slide member
8
Clip or cage nut (eight 8-32)
2
Hex screw (eight M4 x 8mm)
9
Screw (eight 10-32 x 5/8)
3
Front mounting bracket
10
Clip or cage nut (two 10-32)
4
Rear mounting bracket
11
Ball bearing slide member
5
Outer slide member
12
Sticker
6
Middle slide member
13
Thumbscrew (two 10-32)
7
Screw, flat washer, lock washer, nut (eight sets)
14
Door latch insert
Note: If you are installing the library on the IBM Netbay42 Enterprise rack, clip nuts (
8
and
10
) are provided. If
you are installing a Netbay11, Netbay25, or Netbay42 standard rack, cage nuts are provided.
Figure 11. Rack mounting the library
12
4560SLX Tape Library: User’s Guide
Get other manuals https://www.bkmanuals.com