IBM 4560SLX User Manual Download

Page: 82 / 128

Installing the cartridge elevator

To install the cartridge elevator, complete the following procedure:

Note:

The following procedure assumes that the modules have been prepared for
rack-mount installation or are installed in a rack.

Ensure that the router is mounted at the top of the rack.

If modules are rack-mounted, verify that all units are powered down and the
power cords are removed.

Note:

Attempting to install the cartridge elevator to a fully powered 4560SLX
Tape Library module might cause severe damage to unit circuitry.

Remove drive shoe 2 as shown in Figure 66 on page 73 or the blank cover for
each module that will use the cartridge elevator.

Figure 65. Cartridge elevator router installed

4560SLX Tape Library: User’s Guide

Get other manuals https://www.bkmanuals.com

Summary of Contents for 4560SLX

































































































































Search results

Summary of Contents for 4560SLX

Reviews:

Related manuals for 4560SLX

Brands by name

Popular brands

IBM 4560SLX, User Manual

Search results

Summary of Contents for 4560SLX

Reviews:

Related manuals for 4560SLX

Brands by name

Popular brands