IBM 4560SLX, User Manual

Page: 12 / 128

– Fibre Channel Option (FCO) card
– Interface cables (two)
– Fibre Option User Guide
v
SDLT magazine option (Part number: 59P6661)
– Left magazine
– Right magazine
– Barcode pack
– 4560SLX Tape Library Quick Installation Guide
v LTO magazine option (Part number: 59P6659)
– Left magazine
– Right magazine
– Barcode pack
– 4560SLX Tape Library Quick Installation Guide
v Cartridge elevator option (Part number: 59P6662)
– Ethernet router
– Base mechanism
– Interconnect cables (three)
– 4560SLX Tape Library Quick Installation Guide
v
Cartridge elevator extension option (Part number: 59P6663)
– Base mechanism
– 4560SLX Tape Library Quick Installation Guide
Note: You may also purchase additional 4560SLX Tape Libraries to construct
multi-module library configurations.
Contact your place of purchase if an item is missing or damaged. Be sure to retain
your proof of purchase. It might be required to receive warranty service. See
“Service and support” on page 99 for technical support information.
Library interfaces
The 4560SLX Tape Library includes a SCSI interface-to-host system that supports
Low Voltage Differential (LVD). The tape drives and robotics use separate SCSI
connections and SCSI ID addresses. The drive SCSI I/O is provided through
VHDCI 68-pin SCSI connectors located at the rear of the unit directly under the
tape drives. The Robotics SCSI I/O are provided through VHDCI 68-pin SCSI
connectors located on the library controller board.
The library can also be attached to fibre channel networks using a Fibre Channel
Option (FCO) card (part number: 59P6657).
Front panel
The front panel of the library includes the left and right magazine doors, an
internal viewing window, a touch screen, and a library status LED as shown in
Figure 1 on page 3.
2
4560SLX Tape Library: User’s Guide
Get other manuals https://www.bkmanuals.com