IBM 4247 A00, User Manual

Page: 140 / 322

v
2 to 136 (at 10 CPI and Prop)
v
2 to 163 (at 12 CPI)
v
2 to 204 (at 15 CPI)
v
2 to 233 (at 17.1 CPI)
v
2 to 272 (at 20 CPI)
To change or check the Right Margin:
1. Press Menu/Enter. The message
PRINT OUT=NO
displays.
2. Press
↓
until the message
FORM SETTING
displays.
3. Press
→
until the message
LINE SP=xxxxxxx
displays, where xxxxxxx can be
6
LPI
,
8 LPI
,
12 LPI
,
3L/30MM
,
4L/30MM
,
6L/30MM
,
8L/30MM
, or
12L/30MM
.
4. Press
↓
until the message
RIGHT MARGIN=xxx
displays, where xxx can be a value
from
2
to
272
depending on your character-per-inch setting. If you want to select
a value other than the one displayed, press
←
or
→
.
5. To exit from Program Configuration, press
↓
until the message
STORE=QUIT
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press
←
or
→
to select either
STORE=SAVE
(new
value is stored in NVM) or
STORE=CURRENT
(new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Slashed Zero
You can set this value to:
No (default) All printed zeros will appear without a slash through them.
Yes All printed zeros will appear with a slash through them.
To change or check the Slashed Zero:
1. Press Menu/Enter. The message
PRINT OUT=NO
displays.
2. Press
↓
until the message
FORM SETTING
displays.
3. Press
→
until the message
LINE SP=xxxxxxx
displays, where xxxxxxx can be
6
LPI
,
8 LPI
,
12 LPI
,
3L/30MM
,
4L/30MM
,
6L/30MM
,
8L/30MM
, or
12L/30MM
.
4. Press
↓
until the message
SLASH ZERO=xxx
displays, where xxx can be
NO
or
YES
. If you want to select a value other than the one displayed, press
←
or
→
.
5. To exit from Program Configuration, press
↓
until the message
STORE=QUIT
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press
←
or
→
to select either
STORE=SAVE
(new
value is stored in NVM) or
STORE=CURRENT
(new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Restore Manufacturing Defaults
You can set this value to:
No (default) Save the new values of the selected forms path.
Yes Return to the manufacturing default values of the selected forms
path.
To change or check the Manufacturing Default values:
1. Press Menu/Enter. The message
PRINT OUT=NO
displays.
2. Press
↓
until the message
FORM SETTING
displays.
118
4247 Printer Model A00 User’s Guide