IBM 2145-4F2, Installation Manual

Page: 30 / 143

v Do not leave the device where others can handle and possibly damage the
device.
v
While the device is still in its anti-static bag, touch it to an unpainted metal part
of the system unit for at least 2 seconds. (This action removes static electricity
from the package and from your body.)
v Remove the device from its package and install it directly into your SAN
Volume Controller, without putting it down. If it is necessary to put the device
down, place it onto its static-protective bag. (If your device is an adapter, place it
component side up.) Do not place the device onto the cover of the SAN Volume
Controller or onto a metal table.
v Take additional care when you handle devices during cold weather because
heating reduces indoor humidity and increases static electricity.
xxviii
IBM System Storage SAN Volume Controller: Installation Guide