IBM 2073-700, Quick Installation Manual

Page: 52 / 82

Table 8. This table (optional) is useful for identifying the IP addresses and information
necessary to set up the initialization tool. The table entries serve as a guide only. Fill in the
Value column with your system information. (continued)
Field Value Notes
Internal IP address range Select one of the IP address
ranges listed below. The
range you select must not
conflict with the IP addresses
used for the customer
Ethernet connections to the
management nodes or
interface nodes. The available
IP address ranges are:
1. 172.31.*.*
2. 192.168.*.*
3. 10.254.*.*
Important:
1. If the customer network
does not use IP addresses
in the 172.31.*.* range
then select range 1.
2.
If the customer network
uses IP addresses in the
172.31.*.* range, but does
not use IP addresses in
the 192.168.*.* range, then
select range 2.
3. If the customer network
uses IP addresses in the
172.31.*.* range and the
192.168.*.* range, but
does not use IP addresses
in the 10.254.*.* range,
then select range 3.
File module management
name Name associated with the
file module management
address (such as filemod1)
File module management IP
address Designated customer
management IP for file
module
File module 1 IP address The service access IP address
assigned to file module 1
File module 2 IP address The service access IP address
assigned to file module 2
System name The entire naming
convention for the system
(usually file module name
and the DNS domain name,
like filemod1.customer.com)
Domain name server address
(DNS IP) Numerical address of users
domain name server (such as
9.11.22.xxx) can be multiple
server addresses
42
Storwize V7000 Unified: Quick Installation Guide