IBM 2073-700, Quick Installation Manual

Page: 54 / 82

If you are running a non-Windows operating system, you must create the files
manually on the USB key.
Table 9. Create two files and enter one line each, adjusted to the values fitting to your
environment.
Filename Content
satask.txt satask mknascluster -clusterip 9.111.160.10 -mask 255.255.248.0 -gw
9.111.167.254 -consoleip 9.111.160.50
Where:
v
clusterip = Storwize V7000 Unified IP address
v
mask = Storwize V7000 Unified subnet mask
v
gw = Storwize V7000 Unified gateway address
v
consoleip = File module management IP address
cfgtask.txt cfginit --ip=9.111.160.50 --netmask=255.255.248.0 --gateway=9.111.167.254 --
serviceip1=9.111.160.51 --serviceip2=9.111.160.52 --internalips=10.254.0.1 --
storwizeip=9.111.160.10
Where:
v ip = File module management IP address
v netmask = Storwize V7000 Unified subnet mask
v gateway = Storwize V7000 Unified gateway address
v serviceip1 = File module 1 IP address
v
serviceip2 = File module 1 IP address
v
internalips = Internal IP address range
v
storwizeip = Storwize V7000 Unified IP address
3. Follow the on-screen instructions to configure the system. Select the Initialize a
new Storwize V7000 Unified (file and block system) option from the Welcome
panel of the initialization tool. Click
Next
. Use the initialization tool to
complete the following steps:
ifs00004
Figure 42. Initialization tool welcome panel
44
Storwize V7000 Unified: Quick Installation Guide