IBM 2073-700, Quick Installation Manual

Page: 34 / 82

8. Slide the file module into the rack until it snaps into place. To slide the file
module out of the rack, press on the release latches
1
.
Note: When you move the rack cabinet, or if you install the rack cabinet in a
vibration-prone area, insert the M6 screws
2
in the front of the file module.
Step 9. Connecting the SAS cables to the expansion enclosures
This task applies if you are installing one or more expansion enclosures.
Note: The enclosure terminology that is used in this topic is described fully in
“Step 2. Identifying the hardware components” on page 4.
Be aware of these guidelines when you begin to attach the cables to the SAS ports:
v
No more than five expansion enclosures can be chained to port 1 (below the
control enclosure). The connecting sequence from port 1 of the node canister is
called chain 1.
ifs00031
Figure 28. Secure the cable management arm and the file module in the rack for shipping if
needed.
ifs00032
2
1
Stor
wize
V
700
0 U
nifie
d
Stor
wize V7000 U
nifie
d
Figure 29. Install the front screws.
24
Storwize V7000 Unified: Quick Installation Guide