IBM 17353LX - 1x8 Console Switch, Installation And User Manual

Page: 50 / 94

36
IBM Rack Console Switch Installation and User’s Guide
Figure 3.10: Flag window
Determining the display of the status flag
1. Access the Flag window. If needed, see “Accessing the Flag window” on page 35.
2. Select Name or eID .
3. Select Displayed to show the flag all the time or select Timed to display the flag for only five
seconds after switching.
4. Select a flag color in the Display Color area.
5. In the Display Mode area, select Opaque for a solid color flag or select Transparent to see
the desktop through the flag.
6. To position the status flag on the desktop:
a. Click Set Position to gain access to the Set Position window.
b. Left-click the title bar and drag to the desired location.
c. Right-click to return to the Flag window.
Figure 3.11: Set position window
NOTE: Changes made to the flag position are not saved until you click OK in the Flag window.
7. Click OK in the Flag window to save the changes.
-or-
Click X or press Esc to exit the window without saving changes.