IBM 17353LX - 1x8 Console Switch, Installation And User Manual

Page: 47 / 94

Chapter 3: Using the OSCAR Interface
33
Figure 3.7: Devices window
3. Select the port number.
4. Click Modify . The Device Modify window opens.
Figure 3.8: Device modify window
5. Choose the number of ports supported by the tiered switch and click OK . If the number of
ports on the tiered switch is not listed, click Other and type a port number between 4 and 24.
6. Click OK .
7. Repeat steps 3-5 for each tiered switch.
8. Click OK in the Devices window to save the changes.
-or-
Click X or press Esc to exit the window without saving changes.
NOTE: Changes made in the Device Modify window are not saved until you click OK in the Devices window.